Recommended Materials And Equipment; Tools And Software Requirements; Screws; Special Handling Of Components - HP xw6400 Service And Technical Reference Manual

●
Keep work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●
Use field service tools, such as cutters, screwdrivers, and vacuums, that are conductive.

Recommended materials and equipment

Materials and equipment that are recommended for use in preventing static electricity include:
● Antistatic tape
● Antistatic smocks, aprons, or sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Conductive foam
●
Conductive tabletop workstations with ground cord of one-megohm ± 10% resistance
●
Static-dissipative table or floor mats with hard tie to ground
●
Field service kits
●
Static awareness labels
●
Wrist straps and footwear straps providing one-megohm ± 10% resistance
● Material handling packages
● Conductive plastic bags
● Conductive plastic tubes
●
Conductive tote boxes
●
Opaque shielding bags
●
Transparent metallized shielding bags
●
Transparent shielding tubes

Tools and software requirements

●
Torx T-15 screwdriver or flathead screwdriver
●
Diagnostics software

Screws

The screws used in the workstation are not interchangeable. They might have standard or metric threads
and might be of different lengths. If an incorrect screw is used during the reassembly process, it can
damage the unit. HP strongly recommends that all screws removed during disassembly be kept with
the removed part, and then returned to their proper locations.

Special handling of components

The following components require special handling when servicing the workstation.
54 Chapter 4 Removal and replacement procedures ENWW