Installing Mass Storage Devices; Connecting Devices - HP Kayak XA 05xx Installation Manual

Installing accessories
Hide thumbs Also See for Kayak XA 05xx:
Table of Contents

Advertisement

HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Minitower PC
Workstation

Installing Mass Storage Devices

Installing Mass Storage Devices

Connecting Devices

If you add an IDE Zip drive, hard disk drive, CD-ROM drive, CD-RW
drive, or tape drive, you need to connect it to power and data cables.
The data cables and connectors provided are shown below:
Cable with one
connector for
3.5-inch Flexible
Disk Drive
On selected models, a
16-bit External 68-pin
SCSI connector
On selected models, a 16-bit SCSI with
five 68-pin SCSI connectors
10
English
34-pin connector
40-pin connectors
Cable with two 40-pin connectors for
IDE Drives, such as CD-ROM Drives,
Zip Drives or Hard Disk Drives.
Power Cables for Hard Disk
Drives, Zip Drives, Tape Drives,
CD-RW, and CD-ROM Drives
Power Cable for 3.5-inch
Flexible Disk Drive

Advertisement

Table of Contents
loading

Table of Contents