Installing Mass Storage Devices; Connecting Devices - HP Kayak XA-s 02xx Manual

HP Kayak XA-s 02xx PC Workstation - Installing Accessories In Your HP Desktop PC Workstation

Installing Mass Storage Devices

Installing Mass Storage Devices
The computer has two internal shelves (for hard disk drives) and two
front-access drive shelves (for front-access drives).
Your computer is supplied with a 3.5-inch floppy disk drive and a
CD-ROM drive. If your computer is supplied with a hard disk, the hard
disk will be installed in the top internal shelf.

Connecting Devices

If you add an IDE Zip drive, hard disk drive, CD-ROM drive, CD-RW
drive, or tape drive, you need to connect it to power and data cables.
The data cables and connectors provided are shown below:
On selected models, a 16-bit
External 68-pin SCSI
connector
Two IDE data cables each with
two 40-pin connectors for IDE
Drives, such as CD-ROM Drives,
Zip Drives or Hard Disk Drives.
10
40-pin connectors
English
34-pin connector
Cable with one connector for
3.5-inch Floppy Disk Drive
On selected models, a 16-bit
SCSI cable with four 68-pin
connectors.