Initiating And Resuming From Standby Or Hibernation - Compaq tc1000 Hardware Manual

When External Power Is Available
Select one of the following options:
■
Plug the AC adapter cable into the tablet PC, then plug the
power cord into the AC adapter and into an AC electrical
outlet.
■
Plug an optional Automobile Power Adapter/Charger into the
tablet PC and into a vehicle cigarette lighter receptacle.
■
Plug an optional Auto/Air Cable into the tablet PC and into
the in-seat power supply available on some commercial
aircraft. (An optional Auto/Air Cable can run the tablet PC
but cannot charge a battery pack.)
■
Plug an optional DC cable into the tablet PC and a
DC electrical outlet.
When No Power Source Is Available
Initiate Hibernation. Or, save your work, then shut down the
tablet PC.
Initiating and Resuming from Standby or
Hibernation
For more information about Standby and Hibernation, refer on
this CD to the Software Guide, "Power" chapter.
■
To initiate Standby, slide and release the power switch. To
resume from Standby, slide and release the power switch,
press any key or activate the pointing device on an optional
tablet PC keyboard, or activate an optional USB mouse.
■
To initiate Hibernation, select Start > Shut Down >
Hibernate. If the Hibernate option is not displayed and an
optional keyboard is in the system, press and hold
(When you press and hold
the Stand by option in the Shut Down window.) To resume
from Hibernation, slide and release the power switch.
For information about initiating Standby or Hibernation from the
Q Menu, refer on this CD to the Software Guide, "Q Menu and
Desktop Profile Manager Utility" chapter.
Hardware Guide
the Hibernate option replaces
shift,
Battery Packs
shift.
3–13