Connecting The Network Cable - Compaq tc1000 Hardware Manual

Network Connections

Connecting the Network Cable

A network cable has an 8-pin RJ-45 network connector at each
end and may contain noise suppression circuitry, which prevents
interference with TV and radio reception.
1. To access the tablet PC RJ-45 network jack 1 , open the upper
panel of the tablet PC.
2. Orient the end of a network cable with noise suppression
circuitry 2 toward the tablet PC.
3. Plug the network cable into the tablet PC RJ-45 network
jack 3 .
4. Plug the other end of the cable into the network RJ-45
jack 4 .
Connecting a network cable
Å
WARNING: To reduce the risk of electric shock, disconnect the
network cable before accessing an internal compartment of the
tablet PC. Internal compartments include the memory and Mini PCI
compartment and the hard drive bay.
7–2 Hardware Guide