Replacing A Battery Pack; Removing A Battery Pack - Compaq tc1000 Hardware Manual

Battery Packs

Replacing a Battery Pack

Removing a Battery Pack

Ä
CAUTION: To prevent loss of work when removing a battery pack that is
running the tablet PC, initiate Hibernation or turn off the tablet PC before
removing the battery pack.
■
If you remove a battery pack that is running the tablet PC while
the tablet PC is in Standby, your work is saved in Standby for up
to one minute, then the tablet PC shuts down and your unsaved
work is lost.
■
If you remove a battery pack that is running the tablet PC while
the tablet PC is on, the tablet PC shuts down immediately and
your unsaved work is lost.
To remove a battery pack from the tablet PC:
1. Turn the tablet PC front side down. (If a battery pack security
screw is in place, remove the screw.)
2. To unlock the battery pack release latch, press the latch firmly
toward the unlock icon 1 . Then slide and hold the latch as
you disengage the 2 tabs on the battery pack from the 2 slots
on the battery bay 2 and lift the battery pack out of the
battery bay 3 .
Removing a battery pack
3–2 Hardware Guide