Connecting The Modem To An Rj-11 Jack - Compaq tc1000 Hardware Manual

Connecting the Modem to an RJ-11 Jack

To connect the modem to an analog telephone line that has an
RJ-11 telephone jack:
1. To access the RJ-11 jack 1 on the tablet PC, open the upper
panel of the tablet PC.
2. If the modem cable has noise suppression circuitry 2 , which
prevents interference with TV and radio reception, orient the
circuitry end of the cable toward the tablet PC.
3. Plug the cable into the RJ-11 telephone jack 3 (not the
RJ-45 network jack) on the tablet PC.
4. Plug the modem cable into an RJ-11 telephone jack 4 (not
into an RJ-45 network jack or a PBX jack).
Connecting the modem to an RJ-11 telephone wall jack
(Telephone wall jacks vary in appearance by region.)
Å
WARNING: To reduce the risk of electric shock, disconnect the
modem from the telephone network before accessing an internal
compartment of the tablet PC. Internal compartments include the
memory and Mini PCI compartment and the hard drive bay.
Hardware Guide
Internal Modem
6–3