External Device Connections; Standard Device - Compaq tc1000 Hardware Manual

External Device Connections

Standard Device

The jacks and connectors described in this guide support standard
external devices.
■
For information about which jack or connector to use, refer to
the documentation included with the device.
■
For information about installing or loading any software
required by the device, refer to the device documentation, the
operating system Help files, or the device manufacturer's
Web site.
To connect a standard external device to the tablet PC:
1. If you are connecting a powered device, be sure the device is
turned off.
2. Connect the device to a jack or connector on the tablet PC.
3. If you are connecting a powered device, plug the device
power cord into a grounded electrical outlet.
4. Turn on the device.
✎
If a properly connected display device does not display an image,
try pressing the Q menu button > Internal and External item or
External Only item to switch the image to the new device. If the
tablet PC is docked, also refer on this CD to the Software Guide,
"Q Menu and Desktop Profile Manager Utility" chapter,
"Desktop Profile Manager Utility" section.
To disconnect a standard external device from the tablet PC, turn
off the device (if it is powered), then disconnect the device from
the tablet PC.
Hardware Guide
8
8–1