Coax-Ethernet Adapter MCA1001 User Manual
The update process typically takes 2 to 3 minutes.
Warning: When uploading firmware to the Coax-Ethernet Adapter, do not
9. If a failure message appears, repeat the update steps.
When the update is complete, a success confirmation appears. Your updated firmware version
is now displayed in the Firmware Update screen.
Viewing Statistics
Use statistics to review information about your Coax-Ethernet Adapter network.
Note: Any status or settings displayed while in configuration mode will be those updated
before the coax-ethernet adapter was taken out of normal mode.
3-8
interrupt the update by pressing the coax-ethernet adapter's Mode
Config/Normal button. Also, do not remove power or disconnect either
your computer or coax-ethernet adapter. If the update is interrupted, it
could corrupt the firmware.
Managing Your MCA1001 Coax-Ethernet Adapter Network
v1.0, December 2008