Coax-Ethernet Adapter MCA1001 User Manual
•
Select SCAN (available with either MoCA D Band or All Pass mode). This setting
allows the Coax-Ethernet Adapter to automatically scan and then set the channel
frequency as appropriate to your cable service.
•
Select an available channel in MoCA D Band diplexer mode. If MoCA D Band is
selected for the diplexer mode, select an available channel, as shown in
Figure 3-11
•
Select an available channel in All Pass diplexer mode. If All Pass is selected for the
diplexer mode, select an available channel, as shown in
Figure 3-12
4. Click Apply to save your settings.
3-14
Managing Your MCA1001 Coax-Ethernet Adapter Network
v1.0, December 2008
Figure
Figure
3-12.
3-11.