Show Statistics - NETGEAR WNCE2001 - Ethernet to Wireless Adapter Workshop Manual

Universal WiFi Internet Adapter WNCE2001

Show Statistics

On the Device Status screen, click Show Statistics to display the following screen:
Table 2. Show Statistics Fields
Field
LAN or WLAN
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
Poll Interval
Description
The statistics for the LAN (local), and wireless LAN (WLAN) ports. For each
port, the screen displays the following:
The link status of the port.
The number of packets transmitted on this port since reset or the connection
was established.
The number of packets received on this port since reset or the connection
was established.
The number of collisions on this port since reset or the connection was
established.
The current line utilization—percentage of current bandwidth used on this
port.
The average line utilization for this port.
The time elapsed since the last power cycle, reset, or when the connection
was established.
Specify the poll interval frequency. If you change this value, click Set
Interval so that your change takes effect.
Chapter 2. Advanced Settings | 11