NETGEAR MCA1001 - MoCA Coax-Ethernet Adapter User Manual page 17

1. Connect the Coax-Ethernet Adapter to your router or other device by connecting the provided
Ethernet cable between the coax-ethernet adapter's Ethernet port and an Ethernet (LAN) port
on your device.
Figure 2-2
Note: Do not plug in the power to the MCA1001 until the last step.
2. Disconnect your cable modem from your incoming cable service.
Figure 2-3
Using Your Coax-Ethernet Adapter in DSL, Cable Modem, and Multimedia Settings
Coax-Ethernet Adapter MCA1001 User Manual
v1.0, December 2008
2-3