NETGEAR MCA1001 - MoCA Coax-Ethernet Adapter User Manual page 33

1. Select Firmware Update under Advanced on the main menu.The Firmware Update screen
displays.
Figure 3-5
2. Make note of the firmware version of your coax-ethernet adapter.
3. Connect your computer to the Internet and go to the MCA1001 support page on the
NETGEAR website at
http://www.netgear.com/support.
4. Compare the version number of the most recent firmware offered to the firmware version of
your coax-ethernet adapter. If the version on the NETGEAR website is more recent, download
the file from the MCA1001 support page to your computer.
5. Reconnect your computer.to your coax-ethernet adapter and log in to the MCA1001
Configuration Utility.
6. Again, select Firmware Update under Advanced on the main menu.
7. Click Browse, and locate the firmware file that you downloaded to your computer (the file
name includes the version number and ends with .bin).
8. Click Upload to send the firmware to the coax-ethernet adapter.
Managing Your MCA1001 Coax-Ethernet Adapter Network
Coax-Ethernet Adapter MCA1001 User Manual
v1.0, December 2008
3-7