2. Connect the local MCA1001 to a wall outlet or power strip.
Figure 3-1
3. Directly connect the local MCA1001 to the computer on which you installed the MCA1001
Configuration Utility using an Ethernet cable, as shown in
Note: The MCA1001 Configuration Utility will not operate properly if you connect
the local MCA1001 to a computer through a router or an Ethernet switch.
Figure 3-2
Managing Your MCA1001 Coax-Ethernet Adapter Network
Coax-Ethernet Adapter MCA1001 User Manual
v1.0, December 2008
Figure
3-2.
3-3