Rear Panel - NETGEAR MCA1001 - MoCA Coax-Ethernet Adapter User Manual

Table 1-1. LED Descriptions (continued)
Label LED Activity
Solid
Coax traffic
Off
a. If the LED button on the rear panel is pressed in, all LEDs are deactivated (see

Rear Panel

The coax-ethernet adapter rear panel, shown in
and a port.
Coax IN
Figure 1-2
Viewed from left to right, the rear panel contains the following items, as described in
Table 1-2. Connections, Buttons, and Port
Item
Coax IN connection
Coax OUT connection
Getting to Know Your Coax-Ethernet Adapter
a Description
• Solid. A valid coax link exists to the Coax-Ethernet Adapter.
• Blinking. There is traffic on the Coax cable connection.
• Off. No link is established to the Coax-Ethernet Adapter.
Figure
Coax OUT
Description
Connect coax cable to your cable wall outlet.
Connect coax cable to a television, set-top box, or cable modem
(optional).
v1.0, December 2008
Coax-Ethernet Adapter MCA1001 User Manual
"LED button (Off/On)" on page
1-2, contains coax connections, buttons,
Ethernet port
Mode button (Configuration/Normal)
1-3).
Power outlet
Reset button
LED button (Off/On)
Table 1-2.
1-3