NETGEAR MCA1001 - MoCA Coax-Ethernet Adapter User Manual page 21

1. Connect the Coax-Ethernet Adapter to your router that connects to the DSL modem by
connecting the provided Ethernet cable between the coax-ethernet adapter's Ethernet port and
an Ethernet (LAN) port on the router.
Figure 2-8
Note: Do not plug in the power to the MCA1001 until the last step.
2. Connect the Coax-Ethernet Adapter to your incoming cable service.
Figure 2-9
Using Your Coax-Ethernet Adapter in DSL, Cable Modem, and Multimedia Settings
Coax-Ethernet Adapter MCA1001 User Manual
v1.0, December 2008
2-7