Starting The Mca1001 Configuration Utility - NETGEAR MCA1001 - MoCA Coax-Ethernet Adapter User Manual

Coax-Ethernet Adapter MCA1001 User Manual
4. Press the coax-ethernet adapter's Mode Config/Normal button in (in position) to put it into
configuration mode.
Figure 3-3
Notes: 
When the Mode Config/Normal button is on (LED is solid), the Coax-Ethernet
Adapter is in configuration mode, not normal operating mode. The coax-
ethernet adapter does not convey traffic while in this mode.

Any status or settings displayed by the coax-ethernet adapter while in
configuration mode will be those updated before the coax-ethernet adapter is
taken out of normal mode.

Starting the MCA1001 Configuration Utility

To start the MCA1001 Configuration Utility, double-click the MCA1001 Configuration Utility
icon on your desktop. The MCA1001 Configuration Utility will detect the local MCA1001
you connected and display the login screen.
3-4 Managing Your MCA1001 Coax-Ethernet Adapter Network
v1.0, December 2008
Mode button
(Configuration/
Normal)