Restoring the Default Configuration
You can restore the Coax-Ethernet Adapter to its default factory settings using the following
methods:
•
Manually pressing the Reset button longer than 10 seconds (for more information, see
Panel" on page
1-3).
•
Through the MCA1001 Configuration Utility (this topic).
Warning: These procedures erase all current configuration settings, including any
To restore the default factory settings of the Coax-Ethernet Adapter:
1. Select Factory Reset under Advanced in the main menu. The Factory Reset screen displays.
Figure 3-13
2. Click Restore Defaults.
If LEDs are on, the Ethernet and Coax traffic LEDs will go off to indicate when the Coax-
Ethernet Adapter has finished resetting.
Managing Your MCA1001 Coax-Ethernet Adapter Network
security settings.
v1.0, December 2008
Coax-Ethernet Adapter MCA1001 User Manual
"Rear
3-15