Using With A Dsl Modem - NETGEAR MCA1001 - MoCA Coax-Ethernet Adapter User Manual

Coax-Ethernet Adapter MCA1001 User Manual

Using with a DSL Modem

Note: If you plan to use a splitter on your incoming cable signal, NETGEAR
recommends you use a high quality splitter to lessen the chance of digital video or
data loss. Also, make sure all coax connections are finger tight to ensure there is no
signal loss.
Follow the steps in this section to use your Coax-Ethernet Adapter with a DSL modem. After you
have completed these steps, your network will resemble this illustration:
1. Coax IN
2. Coax OUT
3. Ethernet 
cable
4. Telephone 
cable
Figure 2-7
To install a Coax-Ethernet Adapter with a DSL modem:
Note: It is not necessary to disconnect your DSL modem from its power, the Internet, or
other connections within your network, such as your router.
2-6 Using Your Coax-Ethernet Adapter in DSL, Cable Modem, and Multimedia Settings
DSL 
modem
Router
Laptop
PC
v1.0, December 2008
Internet
Cable
TV
MCA1001