Default Addressing Configuration - Cisco WS-C3020 Software Configuration Manual

Configuring IP Addressing
•
•
•
•

Default Addressing Configuration

Table 34-1
Table 34-1
Feature
IP address
ARP
IP broadcast address
IP classless routing
IP default gateway
IP directed broadcast
IP domain
IP forward-protocol
IP helper address
IP host
IRDP
IP proxy ARP
IP routing
IP subnet-zero
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
34-4
Configuring Address Resolution Methods, page 34-7
Routing Assistance When IP Routing is Disabled, page 34-10
Configuring Broadcast Packet Handling, page 34-12
Monitoring and Maintaining IP Addressing, page 34-16
shows the default addressing configuration.
Default Addressing Configuration
Default Setting
None defined.
No permanent entries in the Address Resolution Protocol (ARP) cache.
Encapsulation: Standard Ethernet-style ARP.
Timeout: 14400 seconds (4 hours).
255.255.255.255 (all ones).
Enabled.
Disabled.
Disabled (all IP directed broadcasts are dropped).
Domain list: No domain names defined.
Domain lookup: Enabled.
Domain name: Enabled.
If a helper address is defined or User Datagram Protocol (UDP) flooding is
configured, UDP forwarding is enabled on default ports.
Any-local-broadcast: Disabled.
Spanning Tree Protocol (STP): Disabled.
Turbo-flood: Disabled.
Disabled.
Disabled.
Disabled.
Defaults when enabled:
•
•
•
•
Enabled.
Disabled.
Disabled.
Broadcast IRDP advertisements.
Maximum interval between advertisements: 600 seconds.
Minimum interval between advertisements: 0.75 times max interval
Preference: 0.
Chapter 34 Configuring IP Unicast Routing
OL-8915-03