Cisco WS-C3020 Software Configuration Manual page 656

Configuring Auto-QoS
Table 32-5 Generated Auto-QoS Configuration (continued)
Description
The switch automatically configures the egress queue buffer
sizes. It configures the bandwidth and the SRR mode (shaped
or shared) on the egress queues mapped to the port.
If you entered the auto qos voip trust command, the switch
automatically sets the ingress classification to trust the CoS
value received in the packet on a nonrouted port by using the
mls qos trust cos command or to trust the DSCP value
received in the packet on a routed port by using the mls qos
trust dscp command.
If you entered the auto qos voip cisco-phone command, the
switch automatically enables the trusted boundary feature,
which uses the CDP to detect the presence or absence of a
Cisco IP Phone.
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
32-24
Automatically Generated Command
Switch(config)# mls qos queue-set output 1 threshold
1 138 138 92 138
Switch(config)# mls qos queue-set output 1 threshold
2 138 138 92 400
Switch(config)# mls qos queue-set output 1 threshold
3 36 77 100 318
Switch(config)# mls qos queue-set output 1 threshold
4 20 50 67 400
Switch(config)# mls qos queue-set output 2 threshold
1 149 149 100 149
Switch(config)# mls qos queue-set output 2 threshold
2 118 118 100 235
Switch(config)# mls qos queue-set output 2 threshold
3 41 68 100 272
Switch(config)# mls qos queue-set output 2 threshold
4 42 72 100 242
Switch(config)# mls qos queue-set output 1 buffers
10 10 26 54
Switch(config)# mls qos queue-set output 2 buffers
16 6 17 61
Switch(config-if)# srr-queue bandwidth shape 10 0 0
0
Switch(config-if)# srr-queue bandwidth share 10 10
60 20
Switch(config-if)# mls qos trust cos
Switch(config-if)# mls qos trust dscp
Switch(config-if)# mls qos trust device cisco-phone
Chapter 32 Configuring QoS
OL-8915-03