Checking And Saving The Running Configuration - Cisco WS-C3020 Software Configuration Manual

Chapter 3 Assigning the Switch IP Address and Default Gateway

Checking and Saving the Running Configuration

You can check the configuration settings that you entered or changes that you made by entering this
privileged EXEC command:
Switch# show running-config
Building configuration...
Current configuration : 3990 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
!
!
no aaa new-model
system env temperature threshold yellow 25
ip subnet-zero
!
no ip domain-lookup
!
!
!
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 2-4,20-22,100,200,999
!
!
interface FastEthernet0
ip address dhcp
no ip route-cache
keepalive 1
!
interface GigabitEthernet0/1
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/2
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/3
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/4
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/5
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/6
speed 1000
spanning-tree portfast
!
OL-8915-03
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
Checking and Saving the Running Configuration
3-15