Cisco WS-C3020 Software Configuration Manual page 864

Displaying Online Diagnostic Tests and Test Results
Table 41-1 show diagnostic Commands
Command
show diagnostic result detail
show diagnostic result test [test_id | test_id_range] [detail]
show diagnostic schedule
show diagnostic post
This example shows how to display the online diagnostics that are configured on a switch:
Switch# show diagnostic content
Diagnostics test suite attributes:
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
ID
==== ================================== ============ =============== =====
1)
2)
3)
4)
5)
6)
This example shows how to display the online diagnostic results for a switch:
Switch# show diagnostic result
Overall diagnostic result: PASS
Test results: (. = Pass, F = Fail, U = Untested)
1) TestPortAsicStackPortLoopback ---> .
2) TestPortAsicLoopback ------------> .
3) TestPortAsicCam -----------------> .
4) TestPortAsicRingLoopback --------> .
5) TestMicRingLoopback -------------> .
6) TestPortAsicMem -----------------> .
This example shows how to display the online diagnostic test schedule for a switch:
Switch# show diagnostic schedule
Current Time = 14:39:49 PST Tue Jul 5 2005
Schedule #1:
To be run daily 12:00
Test ID(s) to be executed: 1.
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
41-4
B/* - Basic ondemand test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
R/* - Switch will reload after test list completion / NA
P/* - will partition stack / NA
Test Name
TestPortAsicStackPortLoopback
TestPortAsicLoopback
TestPortAsicCam
TestPortAsicRingLoopback
TestMicRingLoopback
TestPortAsicMem
Chapter 41
Purpose
Display the online diagnostics test results.
Display the online diagnostics test schedule.
Display the results of POST. (The same as the show post
command.)
Test Interval
attributes day hh:mm:ss.ms shold
B*N****A** 000 00:01:00.00 n/a
B*D*X**IR* not configured
B*D*X**IR* not configured
B*D*X**IR* not configured
B*D*X**IR* not configured
B*D*X**IR* not configured
Configuring Online Diagnostics
Thre-
n/a
n/a
n/a
n/a
n/a
OL-8915-03