Table of Contents
Advertisement
Configuring IP Unicast Routing
This chapter describes how to configure IP Version 4 (IPv4) unicast routing on the switch. The switch
supports basic routing functions, including static routing and the Routing Information Protocol (RIP).
For more detailed IP unicast configuration information, see the Cisco IOS IP Configuration Guide,
Release 12.2 from the Cisco.com page under Documentation > Cisco IOS Software > 12.2 Mainline
> Configuration Guides. For complete syntax and usage information for the commands used in this
chapter, see these command references from the Cisco.com page under Documentation > Cisco IOS
Software > 12.2 Mainline > Command References:
•
•
•
This chapter consists of these sections:
•
•
•
•
•
•
•
•
When configuring routing parameters on the switch and to allocate system resources to maximize the
Note
number of unicast routes allowed, you can use the sdm prefer routing global configuration command
to set the Switch Database Management (sdm) feature to the routing template. For more information on
the SDM templates, see
the command reference for this release.
Understanding IP Routing
In some network environments, VLANs are associated with individual networks or subnetworks. In an
IP network, each subnetwork is mapped to an individual VLAN. Configuring VLANs helps control the
size of the broadcast domain and keeps local traffic local. However, network devices in different VLANs
OL-8915-03
Cisco IOS IP Command Reference, Volume 1 of 3: Addressing and Services, Release 12.2
Cisco IOS IP Command Reference, Volume 2 of 3: Routing Protocols, Release 12.2
Cisco IOS IP Command Reference, Volume 3 of 3: Multicast, Release 12.2
Understanding IP Routing, page 34-1
Steps for Configuring Routing, page 34-3
Configuring IP Addressing, page 34-3
Enabling IP Unicast Routing, page 34-17
Configuring RIP, page 34-17
Configuring Stub Routing, page 34-23
Configuring Protocol-Independent Features, page 34-27
Monitoring and Maintaining the IP Network, page 34-37
Chapter 6, "Configuring SDM Templates"
C H A P T E R
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
34
or see the sdm prefer command in
34-1
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
