Displaying Ipv6 - Cisco WS-C3020 Software Configuration Manual

Displaying IPv6

Command
Step 4
show ipv6 static [ipv6-address |
ipv6-prefix/prefix length] [interface
interface-id] [recursive] [detail]
or
show ipv6 route static [updated]
Step 5 copy running-config startup-config
To remove a configured static route, use the no ipv6 route ipv6-prefix/prefix length {ipv6-address |
interface-id [ipv6-address]} [administrative distance] global configuration command.
This example shows how to configure a floating static route to an interface with an administrative
distance of 130:
Switch(config)# ipv6 route 2001:0DB8::/32 gigabitethernet0/1 130
For more information about configuring static IPv6 routing, see the "Implementing Static Routes for
IPv6" chapter in the Cisco IOS IPv6 Configuration Library at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00807fcf4b.
html
Displaying IPv6
Table 35-3
Table 35-3 Commands for Monitoring IPv6
Command
show ipv6 access-list
show ipv6 interface interface-id
show ipv6 mtu
show ipv6 neighbors
show ipv6 prefix-list
show ipv6 static
show ipv6 traffic
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
35-18
Purpose
Verify your entries by displaying the contents of the IPv6 routing
table.
•
•
•
(Optional) Save your entries in the configuration file.
shows the privileged EXEC commands for monitoring IPv6 on the switch.
Purpose
Display a summary of access lists.
Display IPv6 interface status and configuration.
Display IPv6 MTU per destination cache.
Display IPv6 neighbor cache entries.
Display a list of IPv6 prefix lists.
Display IPv6 static routes.
Display IPv6 traffic statistics.
interface interface-id—(Optional) Display only those static
routes with the specified interface as an egress interface.
recursive—(Optional) Display only recursive static routes. The
recursive keyword is mutually exclusive with the interface
keyword, but it can be used with or without the IPv6 prefix
included in the command syntax.
detail—(Optional) Display this additional information:
– For valid recursive routes, the output path set, and
maximum resolution depth.
– For invalid routes, the reason why the route is not valid.
Chapter 35 Configuring IPv6 Host Functions
OL-8915-03