T1/E1 Channelized Mode - Cisco 2431 - IAD Router Software Configuration Manual

Integrated access devices
Hide thumbs Also See for 2431 - IAD Router:
Table of Contents

Advertisement

Chapter 2
Using the setup Command Facility
X.25 Encapsulation
The following is an example of a typical X.25 encapsulation configuration:
x25 circuit can be either in dce/dte mode.
Choose from either dce/dte [dte]:
Enter local x25 address: 1234
We will need to map the remote x.25 station's x25 address
to the remote stations IP/IPX address
Enter remote x25 address: 4321
Do you want to map the remote machine's x25 address to IP address? [yes]:
IP address for the remote interface: 2.0.0.2
Do you want to map the remote machine's x25 address to IPX address? [yes]:
IPX address for the remote interface: 40.1234.5678
Enter lowest 2-way channel [1]:
Enter highest 2-way channel [64]:
Enter frame window (K) [7]:
Enter Packet window (W) [2]:
Enter Packet size (must be powers of 2) [128]:
SMDS Encapsulation
The following is an example of a typical SMDS configuration:
Enter smds address for the local interface: c141.5556.1415
We will need to map the remote smds station's address
to the remote stations IP/IPX address
Enter smds address for the remote interface: c141.5556.1414
Do you want to map the remote machine's smds address to IP address? [yes]:
Do you want to map the remote machine's smds address to IPX address? [yes]:
Serial Cisco IOS Commands Generated
The following is an example of the Cisco IOS commands generated by a typical serial configuration:
interface Serial0/0
encapsulation ppp
clock rate 2000000
ip address 2.0.0.1 255.0.0.0

T1/E1 Channelized Mode

The following is an example of a T1 channelized mode configuration using the setup command facility:
The following framing types are available:
Enter the framing type [esf]:
The following linecode types are available:
Enter the line code type [b8zs]:
OL-4306-03
IP address for the remote interface: 2.0.0.2
IPX address for the remote interface: 40.1234.5678
esf | sf
ami | b8zs
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
Configuring Controller and Interface Parameters
2-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iad2431-16fxsIad2432-24fxsIad2430 series

Table of Contents