Cisco 2431 - IAD Router Software Configuration Manual page 93

Appendix A Cisco IAD2430 Series Configuration Examples
ip address 12.12.0.1 255.255.0.0
service-policy output CORP-POLICY
ip tcp header-compression iphc-format
load-interval 30
no cdp enable
ppp multilink
ppp multilink fragment-delay 10
ppp multilink interleave
multilink-group 1
ip rtp header-compression iphc-format
ip rtp compression-connections 1000
!
interface FastEthernet0/0
ip address 1.3.21.57 255.255.0.0
load-interval 30
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial1/0:1
bandwidth 768
no ip address
encapsulation ppp
load-interval 30
ppp multilink
multilink-group 1
!
interface Serial1/1:1
bandwidth 768
no ip address
encapsulation ppp
load-interval 30
ppp multilink
multilink-group 1
!
ip http server
ip classless
ip route 1.3.0.0 255.255.255.0 FastEthernet0/0
ip route 10.2.0.0 255.255.0.0 Multilink1
ip route 10.2.0.0 255.255.0.0 12.12.0.2
!
!
!
call threshold global cpu-5sec low 80 high 90 treatment
call threshold global cpu-avg low 80 high 90 treatment
call threshold global total-mem low 80 high 90 treatment
call threshold global io-mem low 80 high 90 treatment
call threshold global proc-mem low 80 high 90 treatment
call threshold global total-calls low 10 high 12 treatment
call rsvp-sync
!
voice-port 0/0
battery-reversal answer
!
voice-port 0/1
battery-reversal answer
!
voice-port 0/2
battery-reversal answer
OL-4306-03
Sample Configuration: Cisco 2432-24FXS with VIC2-4FXO and QoS
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
A-9