To Access Online User Documentation (Pdf And Html Formats); Document Organization - Cisco 2431 - IAD Router Software Configuration Manual

Document Organization

The following table summarizes the major sections of this document.
Chapter
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Appendix A
Appendix B
Appendix C
Related and Referenced Documents
The documents described here are available online. To be sure of obtaining the latest information, you
should access the online documentation.
To print a document in its original page format, access the online document, and click the PDF icon.
You can also order printed copies of documents. See the
Service Request" section on page

To Access Online User Documentation (PDF and HTML Formats)

From Cisco.com at http://www.cisco.com, choose Documentation, > Voice and Unified
Communications, > Voice Gateway, > Cisco IAD2400 Series Integrated Access Devices.
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
viii
Title
Understanding Interface
Numbering and Cisco IOS
Software Basics
Using the setup Command
Facility
Configuring with the
Command-Line Interface
Configuring Voice over IP
Cisco IAD2430 Series
Configuration Examples
Formatting the Flash
Memory
Using the ROM Monitor
ix.
Description
Provides an overview of the interface numbering
conventions for the Cisco IAD2430 series IADs. Also
provides a basic understanding of Cisco IOS software.
Describes how to use the setup command facility to
configure your router.
Describes how to use the Cisco IOS software
command-line interface (CLI) to configure basic router
functionality.
Describes how to configure voice network modules
with digital recEive and transMit (E&M) over T1/E1
CAS, foreign exchange office (FXO), and foreign
exchange station (FXS) interfaces for your router.
Provides a variety of configuration examples:
Cisco IAD2431-8FXS
•
• Cisco IAD2431-16FXS
• Cisco IAD2430-24FXS
• Cisco IAD 2431-1T1/E1 with WIC-2T
Cisco IAD2432-24FXS with VIC2-4FXO and QoS
•
Cisco IAD2435-8FXS
•
Provides configuration information for the flash
memory.
Describes how the ROM monitor works in the
Cisco IAD2430 series IAD.
"Obtaining Documentation and Submitting a
Preface
OL-4306-03