Formatting Flash Memory As A Class B Flash File System; Mode - Cisco 2431 - IAD Router Software Configuration Manual

Appendix B Formatting the Flash Memory
slot0 is not supported on the IAD2435 IAD.
Note
Internal Card with Class B Flash File System
The geometry and format information is not displayed for this format:
Router# show flash: all
Partition

Mode

1
Direct
System Flash directory:
File
1
2
[20879640 bytes used, 107308776 available, 128188416 total]
125184K bytes of ATA System Flash (Read/Write)
Chip information NOT available.
Internal Card with Class C Flash File System
The geometry and format information is displayed in this format:
11# show flash: all
-#- --length-- -----date/time------ path
1
25268224 bytes available (6664192 bytes used)
******** ATA Flash Card Geometry/Format Info ********
ATA CARD GEOMETRY
Number of Heads:
Number of Cylinders
Sectors per Cylinder
Sector Size
Total Sectors
ATA CARD FORMAT
Number of FAT Sectors
Sectors Per Cluster
Number of Clusters
Number of Data Sectors 62560
Base Root Sector
Base FAT Sector
Base Data Sector

Formatting Flash Memory as a Class B Flash File System

Use these formatting commands to:
•
OL-4306-03
Size Used
125184K 20390K
Length Name/status
addr fcksum ccksum
6658376 c2430-is-mz
0x40 0xE0FF 0xE0FF
14221136 c2430-telcoent-mz
0x6599C8 0x5C3D 0x5C3D
6658376 Mar 01 2008 04:27:46 c2430-is-mz
4
490
32
512
62720
31
8
7796
155
93
187
Format flash memory with a Class B flash file system (LEFS)
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
Free Bank-Size State
104793K 0K
Formatting Procedures for Flash Memory
Copy
Read/Write
B-3