StarTech.com 3MP2AG-MONITOR-ARM User Manual page 29

surface with the VESA Mounting Points facing up.
Insert the appropriate M-Type Screws (x 4) through the
3.
Washers (x 4), VESA Monitor Mount, and into the back of
the Monitor. (Figure 14)
Note: The side marked with TOP on the VESA Monitor Mount
should be facing towards the top edge when attaching it to
the Monitor(s).
Repeat Steps 1 to 3 with the remaining Monitor(s).
4.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 14
16