Install the VESA Monitor Mount to a Monitor with a
Flat Mounting Surface
Warnings!
Do not overtighten the screws. If you encounter resistance
while tightening the screws, stop tightening. Failure to do so
could result in damage to the Monitor
Ensure the weight of the Monitor does not exceed the weight
capacity of this product. Exceeding the weight capacity, it
may result in personal injury and/or damage to the product,
the attached equipment, and/or the mounting surface. This
product can support the following weight: Up to 15.4 lb
(7 kg) per monitor arm.
Attaching the Monitor(s) is a two-person Job. Do not attempt
to complete this task by yourself.
The attached monitor may not be properly supported by the
display arm until its spring mechanism is correctly adjusted.
This may result in the monitor falling rapidly in some cases.
To avoid personally injury and/or equipment damage,
always exercise caution when releasing the display by
manually support its weight until a stable position is
achieved.
To accommodate different monitor designs,
3MP2AG-MONITOR-ARM comes with sets of screws of various
lengths and diameters, washers, and spacers.
Determine the Depth and Diameter of the VESA Mounting
1.
Holes on the Monitor, to correctly select the mounting
hardware for attaching the VESA Monitor Mount.
Carefully place the Monitor face down on a protective/soft
2.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
15
Need help?
Do you have a question about the 3MP2AG-MONITOR-ARM and is the answer not in the manual?