StarTech.com 3MP2AG-MONITOR-ARM User Manual page 31

Carefully place the Monitor face down on a protective/soft
2.
surface with the VESA Mounting Points facing up.
Insert the appropriate M-Type Screws (x 4) through the
3.
Washers (x 4), VESA Monitor Mount, Spacers (x 4) and into
the back of the Monitor. (Figure 14)
Note: The side marked with TOP on the VESA Monitor Mount
should be facing upward when attaching it to the monitor(s).
Repeat Steps 1 to 3 with the remaining Monitors.
4.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 17
18