Repairs; Manufacturer's Declaration; Declaration Of Conformity - Linak DESKLINE Baselift User Manual

Repairs

In order to avoid the risk of malfunction, all DESKLINE
repairers, as special tools must be used and special gaskets must be fitted. Lifting units under warranty must also be returned
to authorised LINAK workshops.
Warning!
If any of the DESKLINE
Warning!
The DESKLINE
®
hereby declares that LINAK Actuator System composed of:
Control Box(s)
And
Linear Actuator(s)
Lifting Column(s) DL1A, DL2, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12, DL14, DL15, DL16, DL17, BASE1
And
Desk Panel(s)
Handset(s)
complies with EMC Directive: 2014/30/EU according to following standards:
EN 55014-1:2007+A1+A2, EN 55022:2011 Class B,
EN 61000-6-1:2007, EN 61000-6-3:2007
complies with Low Voltage Directive 2014/35/EU according to the standard:
EN 60335-1:2012+A11:2014
EN 62233:2008
complies with Machinery Directive 2006/42/EC according to the standard:
EN 13849-1:2008 SRP/CS Cat. B, PL = b and SRESW PL = b
Note 1: Exempted CBD6S with SW03003007 printed on the label
complies with RoHS2 Directive 2011/65/EU according to the standard:
EN 50581:2012
And
RF Controls:
complies with the Radio Equipment Directive 2014/53/EU according to the standard:
EN 300220-2:2007, EN 61000-6-1:2007, EN 61000-6-3:2007,
EN 60335-1:2012, EN 62311:2008
Nordborg, 2016-05-23
Original Declaration
products are opened, there will be a risk of subsequent malfunction.
®
systems do not withstand cutting oil.

DECLARATION OF CONFORMITY

CBD6S
31xxxH-xxxxx50S, DB4, DB5, DB6, DB7, DB9, DB12, DB14, DB16, LA23
DP1C, DP1K, DP1L, DP1V, DP1U, DPA, DPB, DPF, DPH, DPT, WDPL1
RFT000, RFRL00x, HB1xRF3000, HB2xRFx000
RF-transmitter: HB1xRF3000
RF-transmitter: HB2xRFx000
RF-receiver: RFT000, RFRL
LINAK A/S
John Kling, B.Sc.E.E.
Certification and Regulatory Affairs
Authorized to compile the relevant technical documentation
repairs must only be carried out by authorised LINAK workshops or
®
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
Page 9 of 32
and / or
and / or
and/or
and/or