Description Of The Deskline ® Baselift System - Linak DESKLINE Baselift User Manual

Description of the DESKLINE Baselift system
®
A Baselift system consists of:
• Baselift units
• CBD6S
• Desk Panel (typically DPH or DPT). To avoid cabling between the Desk Panel and the CBD, a wireless system
based on RFRL and RFT can be chosen. This is only an option for matrix panels.
Baselift:
The number of Baselifts used in an application depends on the size of the application. The Baselift is not designed to be a
standalone product and it is not designed to absorb bending moment from the application. As a rule of thumb, a distance of
600 mm between the two Baselift is the maximum distance, when using a 19 mm MDF board under the kitchen cupboards.
This is to get enough stability in all directions. The kitchen producer must determine the exact distance between the Baselifts
according to their specification of their board and cupboards.
CBD6S:
The number of the CBD6S control boxes used in an application depends on the number of Baselifts used. The CBD6S 300W
can be connected with maximum 4 units, the CBD6S 200W with maximum 2 units. If more Baselifts are needed, the system
must be a multi-parallel system. A maximum of 16 Baselifts can be connected with 4 x CBD6S 300W. Use a serial cable for
connection between the control boxes, see combination code for versions.
Desk Panels
All DESKLINE Desk Panels can be used, but the ones preferred are the DPH and the DPT, as customers often want the desk
panel to be integrated in the tabletop. As an option, you can choose to have a wireless system between the DPH and the
CBD to avoid cables behind the drawers in the kitchen. To get a wireless system you add RFT and the RFRL box to the system.
Remember the RFT can only be used with matrix desk panels (DPA, DPB, DPH, DPF1K, DP1K).
Service tool (Special Desk Panel) (Article number DPF1C00-0011)
The standard system setup for a CBD6S-Baselift system is to use a special desk panel when initialising. If this special desk
panel is not used, it is not possible to start up the system. The special desk panel is an extra safety against material damage.
The desk panel ensures that when the system is being initialised with a certain number of Baselift units the system can only
work with this number of units. This means that if a Baselift cable for some reason has been disconnected or damaged, the
system will not run and thereby ensure that e.g. the kitchen is not being destroyed. Please observe that if the service tool is
deselected, the CBD6S needs to be reconfigured.
Page 12 of 32