Repairs - Linak Homeline TWINDRIVE TD4 Advanced User Manual

Repairs

In order to avoid the risk of malfunction, all TWINDRIVE
or repairers, as special tools must be used and special gaskets must be fitted. Products under warranty must also be returned
to authorised LINAK service centres.
Further information on LINAK warranty can be found on the LINAK website www.linak.com/warranty.
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
Herewith declares that LINAK HOMELINE® products as characterized by the following models and
types:
Control Boxes
Linear Actuators
Dual Actuators
Controls
Accessories
comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and
safety requirements relating to the design and construction of machinery:
1.5.1 Electricity supply
The relevant technical documentation is compiled in accordance with part B of Annex VII and that this
documentation or part hereof will be transmitted by post or electronically to a reasoned request by the
national authorities.
This partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the
Machinery Directive 2006/42/EC where appropriate.
Nordborg,
LINAK A/S
John Kling, B.Sc.E.E.
Regulatory Affairs Manager
Authorized to compile the relevant technical documentation
Original Declaration
®
2006/42/EC ANNEX II B
DK - 6430 Nordborg
CB9H, CBH Advanced, CBH Basic
LA27, LA29, LA31 HOMELINE
TD3, TD4, TD5
HB10 RF, HB20RF, HB60, HC10, HC10RF, HC20RF, HC40
Bluetooth Adapter, DC CONNECTOR, LED Lightbox, Lightplug001
Motor, SMPS001, SMPS001, SMPS002, SMPS006
2019-10-21
repairs must only be carried out by authorised LINAK service centres
LINAK A/S
Smedevænget 8
Page 13 of 37
,
Massage