Defining Gvrp - D-Link DES-3010FA Web User Manual

D-Link DES-3010FA/GA User Guide

Defining GVRP

GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership
information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to
bridge ports mapping, without having to individually configure each bridge and register VLAN membership. To
define GARP. To define GVRP on the device:
1. Click Basic Setup > GARP > GVRP. The GVRP Parameters Page opens:
Figure 68: GVRP Parameters Page
The GVRP Parameters Page is divided into port and LAG parameters. The field definitions are the same. The
GVRP Parameters Page contains the following fields:
•
GVRP Global Status — Indicates if GVRP is enabled on the device. The possible field values are:
–
Enable — Enables GVRP on the selected device.
–
Disable — Disables GVRP on the selected device.
•
Copy from Entry Number — Indicates the row number from which GARP parameters are copied.
•
To Row Number — Indicates the row number to which GARP parameters are copied.
•
Port— DIsplays the port on which GVRP is enabled. The possible field values are:
–
Port — Indicates the port number on which GVRP is enabled.
–
LAG — Indicates the LAG number on which GVRP is enabled.
•
GVRP State— Indicates if GVRP is enabled on the port. The possible field values are:
–
Enable — Enables GVRP on the selected port.
–
Disable — Disables GVRP on the selected port.
Page 118