Configuring DHCP
The Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses to devices on a network. DHCP
ensures that network devices can have a different IP address every time the device connects to the network. To
define a DHCP Interface:
1.
Click Basic Setup > IP Configuration > IP Addressing > DHCP. The DCHP Page opens:
Figure 74: DCHP Page
The DCHP Page contains the following fields:
•
Interface — Displays
•
Host Name — Displays the system name.
•
Remove — Removes DHCP interfaces. The possible field values are:
–
Checked — Removes the selected DHCP interface.
–
Unchecked — Maintains the DHCP interfaces.
2.
Click
. The Add DHCP IP Interface Page opens:
the interface D-Link IP address which is connected to the device.
Page 125
Configuring IP Information
Configuring IP Interfaces