Table of Contents
Advertisement
Dst IP Address
IP Fragment
L4 Protocol
Protocol
TCP
Port
UDP
Port
Port Id
Current List
Count
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Notice: This is not subnet mask.
(Set this field if Packet Type is IPv4, else ignore.)
Any / IP and Mask
a.
Any: Any IP address.
b.
IP :A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
(Set this field if Packet Type is IPv4, else ignore.)
Uncheck / Check
a.
Uncheck: Not check IP fragment field.
b.
Check: Check IP fragment field.
(Set this field if Packet Type is IPv4, else ignore.)
Any / ICMP(1) / IGMP(2) / TCP(6) / UDP(17)
(Set this field if Packet Type is IPv4, else ignore.)
0~255.
If protocol not find in L4 Protocol field, you can direct
assign number.
(Set this field if Packet Type is IPv4, else ignore.)
Any / FTP(21) / HTTP(80)
(Set this field if Packet Type is IPv4, else ignore.)
0~65535
If TCP port not find in TCP field, you can direct assign
number.
(Set this field if Packet Type is IPv4, else ignore.)
Any / DHCP(67) / TFTP(69) / NetBios(137)
(Set this field if Packet Type is IPv4, else ignore.)
0~65535
If UDP port not find in UDP field, you can direct assign
number.
Source port id, from 1~26, 0 means don't care.
You create ACL and Binding groups.
The octetcnt is octet number of the packets hiting the
ACL rule.
The packetcnt is the packet number Hiting the ACL rule.
Any
Uncheck
Any
Any
Any
0
0
Advertisement
Table of Contents
