TRENDnet TEG-S2620I User Manual page 10

Hide thumbs Also See for TEG-S2620I:

Table of Contents

After flash writing is completed, system will be automatically rebooted to start the new firmware image:

kermit –

to update firmware or loader image through serial (RS‐232) line transfer in Kermit mode

Loader # kermit [loader]‐ update image file over serial line (kermit mode)

loader – if update loader it needed, if update firmware it not needed.

Here is an example to use the serial line to update new loader:

Loader # kermit loader

Select send file: filename select the loader image "armboot.bin.img" to update, Protocol "kermit".

Table of Contents