4.2.2.2
LACP Commands
[no] lacp
Enable/disable LACP.
lacp system‐priority <1..65535>
Set LACP system priority.
Parameters:
<1..65535> specifies the LACP system priority.
no lacp system‐priority
Set LACP system priority to the default value 32768.
show lacp status
Show LACP enable/disable status and system priority.
show lacp
Show LACP information.
show lacp agg <trunk‐id>
Show LACP aggregator information.
Parameters:
<trunk‐id> specifies the trunk group to be shown.
show lacp port <port‐id>
Show LACP information by port.
Parameters:
<port‐id> specifies the port to be shown.
NOTE: If VLAN group exist, all of the members of static trunk group must be in same VLAN group.