Port Sniffer
5.2.4.2
The Port Sniffer (mirroring) is a method for monitor traffic in switched networks. Traffic through a port can be monitored by one
specific port. That is, traffic goes in or out a monitored port will be duplicated into sniffer port.
Sniffer Type: Select a sniffer mode: Disable / Rx / Tx / Both.
Analysis (Monitoring) Port: It' means Analysis port can be used to see the traffic on another port you want to monitor. You can
connect Analysis port to LAN analyzer or netxray.
Monitored Port: The port you want to monitor. The monitor port traffic will be copied to Analysis port. You can select one
monitor ports in the switch. User can choose which port that they want to monitor in only one sniffer type.
NOTE:
1. The Analysis port is dedicated for monitoring usage. That is the ordinary port function will be unavailable.
2. If you want to disable this function, you must select monitor port to none.