Table of Contents
Advertisement
You can select one port in the Port Number item to configure the parameters of the CIST port.
Parameter
Description
Path Cost
The contribution of the path through this port, when the port is the root port, to the
total cost of the path to the root for this bridge. Value range <1‐200000000>.
Port Priority
You can make it more or less likely to become the root port, the lowest number has the
highest priority. Value range <0‐240>, the value must be in steps of 16. Default value is
128.
Admin Edge
You can choose the value of YES if you want the port to be edge port. If the port is edge
port, when the port becomes a Designated Port it can rapidly transition to the
Forwarding Port State. Value range <NO | YES>. Default value is NO.
Admin
If you want to disable spanning tree protocol on the port, you can choose the value of
Non ‐STP
YES to this port. Value range <NO | YES>. Default value is NO.
Admin P2P
If you want point‐to‐point link auto detection on the port, you can choose the value of
AUTO to this port. If you want point‐to‐point link of the port always be true, you can
choose the value of YES to this port. If you want point‐to‐point link of the port always
be false, you can choose the value of NO to this port. Value range <AUTO | NO | YES>.
Default value is AUTO.
Advertisement
Table of Contents
