Download Print this page
TRENDnet TEG-S2620I Specifications
TRENDnet TEG-S2620I Specifications

TRENDnet TEG-S2620I Specifications

26-port 10/100mbps layer 2 switch w/ gigabit ethernet ports and mini-gbic slots
Hide thumbs Also See for TEG-S2620I:

Advertisement

Quick Links

TECHNICAL FEATURES
TEW-503PI (07-28-2005)
26-Port 10/100Mbps Layer 2 Switch w/
Gigabit Ethernet ports and Mini-GBIC Slots
TEG-S2620i (V1.0R)
The 26-Port 10/100Mbps Layer 2 Switch w/ Gigabit Ethernet ports and
Mini-GBIC Slots provides a reliable foundation for a highly scalable
managed department or workgroup.
Powerful layer 2 performance and advanced security management is
provided with an 8.8Gbps switch fabric, SNMP Version 3 support, a 256
entry Access Control List and Multiple Spanning Tree (802.11s)
technology.
Built-in Gigabit Ethernet ports and Mini-GBIC slots provide high speed
uplinks to backbone switching or servers. Configure the switch using
your choice of Telnet, HyperTerminal or a Browser. Additional
management features such as Port Trunking, IGMP snooping, VLAN,
RMON, Jumbo Frame support, RSTP and MSTP allow administrators to
effectively manage departmental work groups.
• 24 x 10/100Mbps Auto-Negotiation and Auto-MDIX RJ-45 ports
• 2 Pairs of 1x 10/100/1000Mbps RJ-45 port and 1x 1000Base Mini-GBIC slot
• 8K MAC, 220 ACL, 4K VLAN and 1K Multicast entries
• Spanning Tree Protocol (RSTP and MSTP) supported
• Static MAC and port based MAC table with 255 display entries
• IEEE 802.3x Flow Control for both half/full duplex support
• Jumbo frame support up to 9K
• Broadcast Storm Filtering protection against constant Broadcast or Multicast traffic
• Access Control List (ACL) with support up to 256 entries
• Port-Based VLAN (256 Groups), IEEE 802.1q Tag-Based VLAN (PVID 1~255)
• 802.1x authentication and authorization with MD5, EAP and TLS
• IP Multicast, Internet Group Management Protocol (IGMP) snooping and Generic VLAN Registration Protocol
(GVRP)
• 4-Level priority queuing for multiple levels of Quality of Service (QoS)
• RMON Group 1, 2, 3, 9 and PING function from the Switch's diagnostic utilities
• Port Mirroring monitors network traffic such as intrusion detection
• Switch management with Simple Network Management Protocol (SNMP V1.0-V3.0, MIB II), Telnet and Web Browser
• In-band control allows for administration from any Ethernet port on the switch
• Console port management over high speed for out-of-band control (115,200 baud rate)
• Upgradeable firmware via Web browser and TFTP program
• LED display for individual port status: link, activity and speed
• Standard 19" (1U) rack mount size (mounting kit included)
gigabit
TEG-S2620i
rev:07. 1 8.2008

Advertisement

loading
Need help?

Need help?

Do you have a question about the TEG-S2620I and is the answer not in the manual?

Questions and answers

Summary of Contents for TRENDnet TEG-S2620I

  • Page 1 • RMON Group 1, 2, 3, 9 and PING function from the Switch's diagnostic utilities • Port Mirroring monitors network traffic such as intrusion detection • Switch management with Simple Network Management Protocol (SNMP V1.0-V3.0, MIB II), Telnet and Web Browser • In-band control allows for administration from any Ethernet port on the switch •...
  • Page 2 • 100~240VAC, 50/60Hz internal power supply Power Consumption • 30 watts (max) Dimensions • 440 x 184 x 44mm (17.3 x 7.3 x 1.8 in.) (W x H x D) • 2.5 kg (5.2 lb) Weight • Operating: 5°~ 45°C (41°F~ 113°F) •...
  • Page 3 1-888-326-6061 TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com.