Table of Contents
Advertisement
Basic
Create a VLAN and add tagged member ports to it.
1. From the main menu, click Administrator VLAN configuration, click Add then you will see the page as follow.
2. Type a name for the new VLAN.
3. Type a VID (1~4094). The default is 1.
4. From the Available ports box, select ports to add to the switch and click "Add >>". If the trunk groups exist, you can see it in
here (ex: TRK1, TRK2...), and you can configure it is the member of the VLAN or not.
5. Click Next. Then you can view the page as follow：
6. Uses this page to set the outgoing frames are VLAN‐Tagged frames or no. Then click Apply.
Tag: outgoing frames with VLAN‐Tagged.
Untag: outgoing frames without VLAN‐Tagged.
VLAN Filters
Port NO.
Port number(s) to be assigned to see or configure the settings.
Port VID (PVID)
Port VLAN ID will be assigned to untagged traffic on a given port. This feature is useful for accommodating devices that you want
to participate in the VLAN but that don't support tagging. This switch allows user to set one PVID for each port, the range is
Advertisement
Table of Contents
