Table of Contents
Advertisement
Perport Configuration
5.5.3.2
In this page, you can select the specific port and configure the authorization state. There are 4 kinds of authorization state to
provide for each port.
Fu: Force the specific port to be unauthorized.
Fa: Force the specific port to be authorized.
Au: The state of the specific port was determined by the outcome of the authentication.
No: The specific port didn't support 802.1x function.
Misc Configuration
5.5.3.3
In this page, you can change the default configuration for the 802.1x standard:
Quiet Period: Used to define periods of time during which it will not attempt to acquire a supplicant (default time: 60 seconds).
Tx Period: Used to determine when an EAPOL PDU is to be transmitted (Default value is 30 seconds).
Supplicant Timeout: Used to determine timeout conditions in the exchanges between the supplicant and authentication server
(default value: 30 seconds).
Server Timeout: Used to determine timeout conditions in the exchanges between the authenticator and authentication server
(default value: 30 seconds).
ReAuthMax: Used to determine the number of re‐authentication attempts that are permitted before the specific port becomes
unauthorized (default value: 2 times).
Reauth Period: Used to determine a nonzero number of seconds between periodic re‐authentication of the supplications
(default value: 3600 seconds).
Advertisement
Table of Contents
