State Activity
5.3.2.3
Active (select): The port automatically sends LACP protocol packets.
N/A (no select): The port does not automatically sends LACP protocol packets, and responds only if it receives LACP protocol
packets from the opposite device.
1. A link that has either two active LACP ports or one active port can perform dynamic LACP trunking.
A link has two N/A LACP ports will not perform dynamic LACP trunking because both ports are waiting for and LACP protocol
packet from the opposite device.
2. If you are active LACP's actor, when you are select trunking port, the active status will be created automatically.