nd
2
<enable|disable> specifies the untagged frame will be dropped or not. If set enable, drop untagged frame.
<LIST> specifies the port or trunk list (eg. 3, 6‐8, Trk2)
show vlan filter [<LIST>]
Show VLAN filter setting.
Parameters:
[<LIST>] specifies the ports to be showed. If not entered, all ports' filter rules will be showed.
GVRP Commands
[no] gvrp
Enable or disable GVRP.
show gvrp status
Show GVRP enable or disable status.
[no] port gvrp <LIST>
Enable or disable GVRP by port.
Parameters:
<LIST> specifies the port or trunk list to be set
show port gvrp
Show GVRP status by port.
garp timer <join | leave | leave‐all> <0..65535>
Set GARP timer.
Parameters:
<join | leave | leave‐all> specifies a timer (Join, Leave, or Leave‐All) to be set
<0..65535> specifies the timer in seconds.
show garp timer
Show GARP timer.
show gvrp db
Show GVRP DB.
show gvrp gip
Show GVRP GIP.
show gvrp machine
Show GVRP machine.
clear gvrp statistics <LIST>
Clear GVRP statistics by port.
Parameters:
<LIST> specifies the port or trunk list to be set
show gvrp statistics <LIST>
Show GVRP statistics by port.
Parameters:
<LIST> specifies the port or trunk list to be set
[no] gvrp debug [<sys | err | pdu | db | gen | garp | gvrp | vlan>]
Enable/disable GVRP debugging output.