spanning‐tree port path‐cost <1‐200000000> [<port‐list>]
Set spanning tree port path cost of CIST.
Parameters:
<1‐200000000> specifies port path cost.
[<port‐list>] specifies the ports to be set. Null means all ports.
spanning‐tree port priority <0‐240> [<port‐list>]
Set spanning tree port priority of CIST.
Parameters:
<0‐240> specifies the port priority. The value must be in steps of 16.
[<port‐list>] specifies the ports to be set. Null means all ports.
[no] spanning‐tree port mcheck [<port‐list>]
Force the port of CIST to transmit MST BPDUs. No format means not force the port of CIST to transmit MST BPDUs.
Parameters:
[<port‐list>] specifies the ports to be set. Null means all ports.
[no] spanning‐tree port edge‐port [<port‐list>]
Set the port of CIST to be edge connection. No format means set the port of CIST to be non‐edge connection.
Parameters:
[<port‐list>] specifies the ports to be set. Null means all ports.
[no] spanning‐tree port non‐stp [<port‐list>]
Disable or enable spanning tree protocol on the CIST port.
Parameters:
[<port‐list>] specifies the ports to be set. Null means all ports.
spanning‐tree port point‐to‐point‐mac <auto | true | false> [<port‐list>]
Set the port of CIST to be point to point connection.
Parameters:
auto specifies point to point link auto connection.
true specifies point to point link true.
false specifies point to point link false.
[<port‐list>] specifies the ports to be set. Null means all ports.
spanning‐tree mst <0‐15> priority <0‐61440>
Set spanning tree bridge priority of MSTI.
Parameters:
<0‐15> specifies the MSTI instance ID.
<0‐61440> specifies the MSTI bridge priority. The value must be in steps of 4096. Default value is 32768.
spanning‐tree mst <0‐15> vlan [<vlan‐list>]
Set MSTI to map VLAN list.
Parameters:
<0‐15> specifies the MSTI instance ID.
[<vlan‐list>] specifies the mapped VLAN list. Null means all VLANs.
spanning‐tree mst <0‐15> port path‐cost <1‐200000000> [<port‐list>]
Set spanning tree port path cost of MSTI.
Parameters:
<1‐200000000> specifies port path cost.
[<port‐list>] specifies the ports to be set. Null means all ports.