spanning‐tree mst <0‐15> port priority <0‐240> [<port‐list>]
Set spanning tree port priority of MSTI.
Parameters:
<0‐240> specifies the port priority. The value must be in steps of 16.
[<port‐list>] specifies the ports to be set. Null means all ports.
no spanning‐tree mst <0‐15>
Delete the specific MSTI.
Parameters:
<0‐15> specifies the MSTI instance ID.
show spanning‐tree
Show spanning‐tree information of CIST.
show spanning‐tree port [<port‐list>]
Show spanning tree port information of CIST.
Parameters:
[<port‐list>] specifies the port to be shown. Null means all ports.
show spanning‐tree mst configuration
Show MST instance map.
show spanning‐tree mst <0‐15>
Show MST instance information.
Parameters:
<0‐15> specifies the MSTI instance ID.
show spanning‐tree mst <0‐15> port <1‐26>
Show specific port information of MST instance.
Parameters:
<0‐15> specifies the MSTI instance ID.
<1‐26> specifies port number.
show vlan spanning‐tree
Show per VLAN per port spanning tree status.