Shock Customization; Maximum Fork Length, Tire, And Chain-Ring Size; Bolt Size / Tools / Torque Specifications - CONCORD TURBO LEVO User Manual

Levo frames are available in a 29" front and 27.5" rear configuration, with
different wheel/tire and/or fork options. Each of these variables will affect
the bottom bracket height and head angle of the frame, as well as the general
ride characteristics of the bicycle. If you decide to make changes to the stock
configuration, e.g. changing the tire size or fork travel, please check with your
Authorized Specialized Retailer what components, if any, need to change for
compatibility.
11.2 . SHO C K CU STOM IZ AT ION
Specialized frames are generally designed and tested to work with the suspension
components provided as original equipment. When changing out shocks, be aware certain
models of shocks may not be compatible with the frame due to the position of the shock
reservoir, size, and/or other compatibility factors, even if they fit. Always check with your
Authorized Specialized Retailer for advice on compatible shocks.
WARNING! Use of an incompatible shock may cause damage to the shock or
the frame and can cause you to lose control and fall.
11.3 . M AX IMU M FOR K LE NGT H, TIRE , AN D CHAIN - R IN G SIZE
MAX FORK
WHEEL SIZE
TRAVEL
29" Front 27.5" Rear 160 mm
WARNING! Only single crown forks with a specified amount of travel or range
of travel should be used. Use of different styled forks or forks with longer
travel may result in catastrophic failure of the frame which may result in
serious personal injury or death.
With the chain guide removed, a 36t chainring can be used.
1
WARNING! While the frame is generally compatible with tires up to 29" x
2.6 front and 27.5" x 2.6 rear, tire dimensions can vary depending on the
manufacturer, and not all forks are designed to accept a larger tire. Always
check with the fork manufacturer regarding the required clearances.
MAX REAR TIRE
CHAINRING SIZE
SIZE
27.5 x 2.6 32-34t
1
1 1.4 . BOLT S I ZE / TO OLS / TO RQ U E S PEC I FI C ATI ONS
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on your
bicycle is important for your safety. If too little force is applied, the fastener
may not hold securely. If too much force is applied, the fastener can strip
threads, stretch, deform, or break. Either way, incorrect tightening force can
result in component failure, which can cause you to lose control and fall.
Where indicated, ensure that each bolt is torqued to specification. After your
first ride, and consistently thereafter, recheck the tightness of each bolt to
ensure secure attachment of the components. The following is a summary of
torque specifications in this manual:
LOCATION
SEAT COLLAR
STEM @ STEERER TUBE (TRAIL STEM)
STEM @ HANDLEBAR (TRAIL STEM)
SPIDER LOCK-RING
CRANK BOLTS
CHAINRING BOLTS
WATER BOTTLE CAGE BOLT
12 mm REAR AXLE
DERAILLEUR HANGER
HEAD TUBE ICR GUIDE SCREW
TCU DISPLAY 1 & 2
TORQUE
TOOL
(Nm) (in-lbf)
4 mm Hex 6.2 55
5 mm Hex 8 71
4 mm Hex 6 53
Shimano BB-UN 98 /
50 443
Park Tool BBT-18
8 mm Hex 40 354
5 mm Hex 10 90
3 mm Hex 2.8 25
6 mm Hex 15 133
8 mm Hex 25 221
T10 Torx 0.8 7
T10 Torx 0.8 7
36